Print Head Doctor 16
Multi-head recovery system for all types of solvent, eco-solvent, water-based and UV print heads
Versatility & Performance
AUTOMATION
Automatic fluid flow, pressure and temperature control allow for unattended, fully automated operation
HIGH CAPACITY
Three high performance Swiss pumps make it possible for this model to clean up to 6 print heads at once
RECOVERY
Up to 90% recovery rate. Bring back your print heads that you considered a write-off
USABILITY
Complete remote control of all machine functions from our PHD app for Android
Print Head Doctor 16 Features
-
Automatic fluid flow switching in all 16 ports of this machine makes it possible a completely standalone operation. It can run entire programs with different recovery cycles in one set-up.
-
High Flow of 2000 ml/min and high pressure of 25 psi allow cleaning of several print heads at once, or two Kyocera KJ4 heads.
-
All high-performance pumps deliver high performance and reliability.
-
Six input filters and three main filters protect all the pumps in the machine and provide a high flow.
-
Automatic pressure control with the digital pressure readout.
-
Automatic vacuum control with the digital vacuum readout.
-
Capable of doing forward, reverse and thru-head flushing of print heads, with or without Reverse Flushing Caps, automatically without operator intervention.
-
Gauge for monitoring the first-stage filters.
-
Fine-tuned recovery cycles accommodate various degrees of clogging, types of print heads and inks.
-
First stage filters are conveniently located on the side wall and can be replaced in seconds.
-
The vacuum pumps are protected by three filters mounted on the outer wall of the machine.
-
Complete control of the machine from Android devices, including the pump diagnostics.
-
Self-diagnostics can detect pump stalling, over-pressure, temperature sensor and pump failure or disconnection.