Print Head Doctor 14 Features​

​

• High Flow of 1200 ml/min and high pressure of 25 psi allow cleaning of several print heads at once, or the ones with a large number of nozzles. This machine can recover Kyocera KJ4 heads.

• All Swiss pumps deliver high performance and reliability.

• Four input filters and two main filters protect all the pumps in the machine and provide a high flow.

• Automatic pressure control with the digital pressure readout.

• Fluid cooling with the temperature control.

• Capable of doing forward, reverse and thru-head flushing of print heads, with or without Reverse Flushing Caps.

• It has dedicated vacuum pumps that allow Vacuum-Assisted Forward Flushing using Sonic RF Caps, as well as the reverse flushing. The forward pressure can be reduced which makes the recovery process safer for the print heads, while more effective at the same time.

• Digital pressure sensor for monitoring and controlling the print head pressure.

• Two gauges for monitoring vacuum in the RF cap and in the first stage filters.

• Fine-tuned recovery cycles accommodate various degrees of clogging, types of print heads and inks.

• First stage filters are conveniently located on the side wall and can be replaced in seconds.

• Dual first-stage filters and intake tubes for higher fluid flow rate and longer period between changing filters.

• The vacuum pump is protected by two filters mounted on the outer wall of the machine.

• Complete control of the machine from Android devices, including the pump diagnostics.

• Self-diagnostics can detect pump stalling, over-pressure, temperature sensor and pump failure or disconnection.