top of page

Print Head Doctor 15

Automatic recovery system for all types of solvent, eco-solvent, water-based and UV print heads

PHD15-1000.jpg

Automatic Pressure

& Temperature

Control

4 Long-Lasting

Input Filters

2 Main Filters

High-Performance

Swiss Pumps

Completely Automatic Operation

High Flow,

High Pressure

75 kHz 

Ultrasound

with Variable

Power Output

youtube icon png.png
Versatility & Performance

PHD15 can run various cleaning cycles in one set-up without operator intervention

AUTOMATION

Automatic fluid flow, pressure and temperature control allow for unattended, fully automated operation

HIGH CAPACITY

Three high performance Swiss pumps make it possible for this model to clean up to 6 print heads at once

RECOVERY

Up to 90% recovery rate. Bring back your print heads that you considered a write-off

USABILITY

Complete remote control of all machine functions from our PHD app for Android

Print Head Doctor 15 Features

  • Automatic fluid flow switching in all 4 ports of this machine makes it possible a completely standalone operation. It can run entire programs with different recovery cycles in one set-up. 

  • High Flow of 1200 ml/min and high pressure of 25 psi allow cleaning of several print heads at once, or one Kyocera KJ4 head.

  • All Swiss pumps deliver high performance and reliability.

  • Four input filters and two main filters protect all the pumps in the machine and provide a high flow.

  • Automatic pressure control with the digital pressure readout.

  • Fluid cooling with the temperature control.

  • Capable of doing forward, reverse and thru-head flushing of print heads, with or without Reverse Flushing Caps, automatically without operator intervention.

  • It has dedicated vacuum pumps that allow Vacuum-Assisted Forward Flushing using RF Caps, as well as the reverse flushing. The forward pressure is precisely controlled, which makes the recovery process safe for the print heads, while more effective at the same time.

  • Digital pressure sensor for monitoring and controlling the print head pressure.

  • Two gauges for monitoring vacuum in the RF cap and in the first stage filters.

  • Fine-tuned recovery cycles accommodate various degrees of clogging, types of print heads and inks.

  • First stage filters are conveniently located on the side wall and can be replaced in seconds.

  • Dual first-stage filters and intake tubes for higher fluid flow rate and longer period between changing filters.

  • The vacuum pump is protected by two filters mounted on the outer wall of the machine.

  • Complete control of the machine from Android devices, including the pump diagnostics.

  • Self-diagnostics can detect pump stalling, over-pressure, temperature sensor and pump failure or disconnection.

bottom of page